| |
Painted
metallic bedplate with stainless screw products and
rubber vibration absorbers. |
|
|
BITZER
semi-hermetic compressors with crankcase heaters. Low
temperature Packs are fitted with head fans. |
| |
Oil recovery and control
systems composed of: |
| |
|
Removable oil separator
with cut-off and retention valves at discharge. |
|
Oil
accumulation tank with pressure regulating valve. |
 |
|
Solenoid valve
between the separator and the oil tank. |
|
Filter, sight glass and oil
level regulators and cut-off valve per compressor.
|
| |
|
|
|
| |
Control and safety system
composed of: |
| |
|
General high and
low pressure gauges with cut-off valves. |
| |
Electronic oil differential
pressure switch per compressor. |
| |
High / low pressure switch
per compressor. |
| |
|
|
| |
Liquid line composed
of: |
| |
| |
Filter/dryer with
rechargeable cartridge, liquid sight-glass, charging
and service valves. |
| |
Vertical liquid receiver with
inlet, outlet, and safety valves, and liquid sight-glass
columns with float. |
| |
|
|
| |
Suction line composed
of: |
| |
| |
Manifold. |
| |
Suction filters with cleaning
cartridge per compressor and service valves. |
| |
|
|
| |
Connections with flexible
hoses in oil system, pressure gauges and pressure switches. |
| |
Assembly material and
test valves. |
| |
Assembly at workshop. |
| |
Unloaded
start. |
| |
Capacity reduction. |
| |
Head fans in medium
temperature Packs. |
|
|
High or
low pressure transducers / probes , 4/20 m.A outlet,
for electronic control panel |
| |
High pressure switch
for condensation control. |
| |
Low pressure switch
for compressors control. |
| |
High or low pressure
switch in dead zone. |
| |
Different capacity of
liquid receiver than the standard one. |
| |
Electronic oil level
regulator. |
| |
Horizontal receivers. |
| |
Stainless steel manifold. |
| |
Suction line and collector
insulation. |
| |
Power and electric control
panels for compressors, condensation and services. |
| |
For packs with other
compressors, please consult us. |
| |
Unloaded
start. |
| |
Capacity reduction. |
| |
Head fans in medium
temperature Packs. |
| |
High or
low pressure Transducers / probes , 4/20 m.A outlet,
for electronic control panel. |
| |
High pressure switch
for condensation control. |
| |
Low pressure switch
for compressors control. |
| |
High or low pressure
switch in dead zone. |
| |
Different capacity of
liquid receiver than the standard one. |
| |
Horizontal receivers. |
| |
Stainless steel manifold. |
| |
Suction line and manifold
insulation. |
| |
Power and electric control
panels for the compressors, condensation and services. |
| |
For packs with other
compressors
consult us |
| |
Electrical panel included
on the framework, consult
us |
| |
Condenser included on
the framework, consult
us |
